Surveillance video camera
IST-SmartCam-2.0-FLT
- Description
- Specifications
- Documents
Image Sensor: | 1/2.9\\\" 2MP CMOS | |
Signal System: | PAL/NTSC | |
Min. Illumination: | Color: 0.05lux @(F1.2, AGC ON), 0 lux with IR | |
Shutter Time: | 1/25 s to 1/10,000 s | |
Lens: | 3.6mm fixed lens | |
Day&Night: | IR cut filter with auto switch | |
Image Enhancement: | BLC/3D DNR/D-WDR | |
Motion Detection | Support | |
Intelligent Detection(AI) | Human Detection | |
Privacy Protection | Support(4 Self-customized Areas) | |
Wather-Proof: | IP66 | |
Illumination for Infrared Switching: | 1~5Lux | |
Infrared Wavelength: | 850nm | |
Mimimum Illumination: | 0 Lux(IR ON) | |
IR Range: | 6pcs Strong LED//25m IR | |
Compression Standard | ||
Video Compression: | H.265/H.264 | |
Video Bit Rate: | 512Kbps~3072Kbps(main stream H.265) 64kbps~512Kbps(sub stream H.265) | |
Audio Compression: | G711U/G711A | |
Dual Streams: | Yes | |
Triple Streams: | No | |
Image | ||
Max. Image Resolution: | 1920*1080@30fps(2MP) | |
Frame Rate: | 50/60Hz: Max.: 1920*1080@30fps | |
Sub Stream: | 50Hz/60Hz: Max. (800*488/704*576/640*360/352*288)@30fps | |
Third Stream(Mobile Stream): | / | |
Image Settings: | 3D NR, D-WDR, Image Flip, Saturation, Brightness, Contrast, Sharpness adjustable via client software, web browser or Smartphone App | |
Day/Night Switch: | Auto(Passive Mode)/Day/Night/Auto(Active Mode)/Time | |
Audio | ||
Line IN/line OUT: | Support(1ch) | |
Build-in MIC/SPK: | Optional | |
Volnume adject: | yes | |
Network | ||
Network Protocols: | HTTP, TCP/IP, IPv4/v6, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS, DDNS,IP Search(Support P2P, NVR, NVS etc.) | |
System Compatibility: | ONVIF(17.2 with profile S) | |
On-line Viewing | Max. Support 2 Users Simultaneously | |
Interface | ||
Communication Interface: | 1 RJ45 10M / 100M Ethernet Interface | |
RCA Audio Interface: | RCA Audio input/output Interface (Optional) | |
Alarm in/out interface: | Support(1ch) (Optional) | |
SD card interface: | Support TF card(micro TF card,up to 128G) (Optional) | |
DC Power Plug: | DC Power Femate Interface | |
General | ||
Operating Conditions: | -10 °C ~ 60 °C | |
Humidity 95% or less (non-condensing) | ||
Power Supply: | 12 V DC ± 10%/PoE(Optional) | |
Power Consumption: | 12 VDC ± 10%, Max Power Comsumption Less than 8W (When the infrared lamps turn on) | |
Weight: | 0.65KG |